<?xml version="1.0" encoding="UTF-8"?>
<section version="3.1" id="150x10fb" category="FB">
  <designation>150x10FB</designation>
  <name>150x10FB Flat Bar</name>
  <shape>FB</shape>
  <productStandard ref="AS-NZS-3679-1"/>
  <dimensions>
    <dim key="b" unit="mm" label="Width" status="UNVERIFIED">150</dim>
    <dim key="t" unit="mm" label="Thickness" status="UNVERIFIED">10</dim>
  </dimensions>
  <properties>
    <prop key="A" unit="mm2" label="Gross area" status="CALCULATED">1500</prop>
    <prop key="mass" unit="kg/m" label="Mass per metre" status="CALCULATED">11.775</prop>
    <prop key="Ix" unit="mm4" label="Second moment of area Ix" status="CALCULATED" note="Bending about the minor (thickness) axis">12500</prop>
    <prop key="Zx" unit="mm3" label="Elastic section modulus Zx (min)" status="CALCULATED">2500</prop>
    <prop key="rx" unit="mm" label="Radius of gyration rx" status="CALCULATED">2.8868</prop>
    <prop key="Iy" unit="mm4" label="Second moment of area Iy" status="CALCULATED" note="Bending about the major (width) axis">2812500</prop>
    <prop key="Zy" unit="mm3" label="Elastic section modulus Zy (min)" status="CALCULATED">37500</prop>
    <prop key="ry" unit="mm" label="Radius of gyration ry" status="CALCULATED">43.3013</prop>
    <prop key="J" unit="mm4" label="Torsion constant J" status="CALCULATED" note="bt³/3·(1−0.63t/b)">47900</prop>
    <prop key="extArea" unit="m2/m" label="External surface area" status="CALCULATED">0.32</prop>
  </properties>
  <source>
    <publisher>Pending verification – nominal dimensions entered by the application developer</publisher>
    <document>AS/NZS 3679.1:2016 Structural steel – Hot-rolled bars and sections</document>
    <edition>2016</edition>
    <publicationYear>2016</publicationYear>
    <pageReference/>
    <lastUpdated>2026-10-12</lastUpdated>
    <verificationStatus>UNVERIFIED</verificationStatus>
    <notes>Nominal dimensions require verification against the current edition of AS/NZS 3679.1:2016 Structural steel – Hot-rolled bars and sections and the manufacturer catalogue before design use. Properties are calculated by this application from the nominal dimensions.</notes>
  </source>
  <tags/>
</section>
