Local producer
Standards: AS/NZS 3678
AU · PL · Bars & plates
Steel Plates
Hot-rolled structural plate. Listed per 1000 mm reference width, so mass per metre equals mass per square metre.
Tick sections to compare. Values in the units shown in each column header.
| Select to compare | Designation | tmm | Widthmm | Masskg/m | Surfacem²/m | Data |
|---|---|---|---|---|---|---|
| PL5 (per 1000 mm width) | 5.0 | 1,000.0 | 39.25 | 2.000 | U | |
| PL6 (per 1000 mm width) | 6.0 | 1,000.0 | 47.10 | 2.000 | U | |
| PL8 (per 1000 mm width) | 8.0 | 1,000.0 | 62.80 | 2.000 | U | |
| PL10 (per 1000 mm width) | 10.0 | 1,000.0 | 78.50 | 2.000 | U | |
| PL12 (per 1000 mm width) | 12.0 | 1,000.0 | 94.20 | 2.000 | U | |
| PL16 (per 1000 mm width) | 16.0 | 1,000.0 | 125.60 | 2.000 | U | |
| PL20 (per 1000 mm width) | 20.0 | 1,000.0 | 157.00 | 2.000 | U | |
| PL25 (per 1000 mm width) | 25.0 | 1,000.0 | 196.25 | 2.000 | U | |
| PL32 (per 1000 mm width) | 32.0 | 1,000.0 | 251.20 | 2.000 | U | |
| PL40 (per 1000 mm width) | 40.0 | 1,000.0 | 314.00 | 2.000 | U | |
| PL50 (per 1000 mm width) | 50.0 | 1,000.0 | 392.50 | 2.000 | U |
V Verified · C Calculated · U Unverified · D Deprecated – what this means
Where to buy
Producers of Plates – local mills first. Buy direct from the mill for large tonnages, or through a steel distributor / stockist for small quantities and cut lengths.
International producer
Standards: JIS G 3106, JIS G 3136
International producer
Standards: GB/T 1591
Profile U
International producer
Standards: KS D 3503, EN 10025, ASTM A36
International producer
Standards: KS D 3503
International producer
Standards: IS 2062
Buying checklist
- Specify the section designation, product standard and steel grade exactly (e.g. "PL5 (per 1000 mm width) – AS/NZS 3678:2016").
- Ask for mill test certificates (EN 10204 type 3.1 or equivalent) traceable to the heat number.
- Sections from another standard system are not automatically equivalent – have the engineer approve any substitution.
- Check availability, minimum order quantity, stock lengths, lead time and delivery terms with the mill or distributor.
All producers of this product type →
Listing is informational only – not an endorsement, offer or confirmation of availability. Company details are marked UNVERIFIED until checked.