Local producer
Standards: AS/NZS 3679.1
AU · UC · Hot-rolled
Universal Columns
Hot-rolled H-sections with near-equal depth and flange width, used mainly as columns.
Tick sections to compare. Values in the units shown in each column header.
| Select to compare | Designation | dmm | bfmm | tfmm | twmm | Masskg/m | Amm² | Ix10⁶ mm⁴ | Zx10³ mm³ | Iy10⁶ mm⁴ | Zy10³ mm³ | Data |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 310UC158 | 327.0 | 311.0 | 25.0 | 15.7 | 158.05 | 20,133 | 387.433 | 2,369.6 | 125.457 | 806.8 | U | |
| 310UC137 | 321.0 | 309.0 | 21.7 | 13.8 | 137.19 | 17,476 | 329.739 | 2,054.4 | 106.794 | 691.2 | U | |
| 310UC118 | 315.0 | 307.0 | 18.7 | 11.9 | 117.90 | 15,020 | 277.836 | 1,764.0 | 90.242 | 587.9 | U | |
| 310UC96.8 | 308.0 | 305.0 | 15.4 | 9.9 | 97.12 | 12,373 | 223.091 | 1,448.6 | 72.865 | 477.8 | U | |
| 250UC89.5 | 260.0 | 256.0 | 17.3 | 10.5 | 89.44 | 11,393 | 142.703 | 1,097.7 | 48.409 | 378.2 | U | |
| 250UC72.9 | 254.0 | 254.0 | 14.2 | 8.6 | 73.18 | 9,322 | 114.083 | 898.3 | 38.805 | 305.6 | U | |
| 200UC59.5 | 210.0 | 205.0 | 14.2 | 9.3 | 59.84 | 7,623 | 61.411 | 584.9 | 20.408 | 199.1 | U | |
| 200UC52.2 | 206.0 | 204.0 | 12.5 | 8.0 | 52.28 | 6,660 | 52.624 | 510.9 | 17.700 | 173.5 | U | |
| 200UC46.2 | 203.0 | 203.0 | 11.0 | 7.3 | 46.31 | 5,899 | 45.677 | 450.0 | 15.347 | 151.2 | U | |
| 150UC37.2 | 162.0 | 154.0 | 11.5 | 8.1 | 37.18 | 4,736 | 22.220 | 274.3 | 7.009 | 91.0 | U | |
| 150UC30.0 | 158.0 | 153.0 | 9.4 | 6.6 | 30.33 | 3,863 | 17.696 | 224.0 | 5.617 | 73.4 | U | |
| 150UC23.4 | 152.0 | 152.0 | 6.8 | 6.1 | 23.39 | 2,980 | 12.559 | 165.3 | 3.985 | 52.4 | U | |
| 100UC14.8 | 97.0 | 99.0 | 7.0 | 5.0 | 14.81 | 1,887 | 3.184 | 65.6 | 1.135 | 22.9 | U |
V Verified · C Calculated · U Unverified · D Deprecated – what this means
Where to buy
Producers of Hot-rolled beams & columns (I / H / W) – local mills first. Buy direct from the mill for large tonnages, or through a steel distributor / stockist for small quantities and cut lengths.
International producer
Standards: EN 10365, BS 4-1, EN 10025
International producer
Standards: EN 10365, EN 10025
International producer
Standards: JIS G 3192, JIS G 3136
International producer
Standards: GB/T 11263, EN 10365, ASTM A6
Profile U
International producer
Standards: GB/T 11263
Profile U
Buying checklist
- Specify the section designation, product standard and steel grade exactly (e.g. "310UC158 – AS/NZS 3679.1:2016").
- Ask for mill test certificates (EN 10204 type 3.1 or equivalent) traceable to the heat number.
- Sections from another standard system are not automatically equivalent – have the engineer approve any substitution.
- Check availability, minimum order quantity, stock lengths, lead time and delivery terms with the mill or distributor.
All producers of this product type →
Listing is informational only – not an endorsement, offer or confirmation of availability. Company details are marked UNVERIFIED until checked.