Local producer
Standards: GB/T 11263, EN 10365, ASTM A6
Profile U
CN · HN · Hot-rolled
HN narrow-flange H-sections
Hot-rolled narrow-flange H-sections to GB/T 11263, mainly used as beams.
Tick sections to compare. Values in the units shown in each column header.
| Select to compare | Designation | dmm | bfmm | tfmm | twmm | Masskg/m | Amm² | Ix10⁶ mm⁴ | Zx10³ mm³ | Sx10³ mm³ | Iy10⁶ mm⁴ | Data |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| HN800×300×14×26 | 800.0 | 300.0 | 26.0 | 14.0 | 206.85 | 26,351 | 2,863.708 | 7,159.3 | 8,098.6 | 117.208 | U | |
| HN700×300×13×24 | 700.0 | 300.0 | 24.0 | 13.0 | 181.77 | 23,155 | 1,974.981 | 5,642.8 | 6,338.6 | 108.153 | U | |
| HN600×200×11×17 | 600.0 | 200.0 | 17.0 | 11.0 | 103.40 | 13,171 | 755.598 | 2,518.7 | 2,903.9 | 22.741 | U | |
| HN500×200×10×16 | 500.0 | 200.0 | 16.0 | 10.0 | 88.12 | 11,225 | 468.134 | 1,872.5 | 2,130.0 | 21.382 | U | |
| HN450×200×9×14 | 450.0 | 200.0 | 14.0 | 9.0 | 74.92 | 9,543 | 328.889 | 1,461.7 | 1,651.8 | 18.701 | U | |
| HN400×200×8×13 | 400.0 | 200.0 | 13.0 | 8.0 | 65.45 | 8,337 | 234.579 | 1,172.9 | 1,312.7 | 17.357 | U | |
| HN350×175×7×11 | 350.0 | 175.0 | 11.0 | 7.0 | 49.39 | 6,291 | 135.010 | 771.5 | 864.3 | 9.842 | U | |
| HN300×150×6.5×9 | 300.0 | 150.0 | 9.0 | 6.5 | 36.73 | 4,678 | 72.100 | 480.7 | 542.2 | 5.075 | U | |
| HN250×125×6×9 | 250.0 | 125.0 | 9.0 | 6.0 | 29.02 | 3,697 | 39.648 | 317.2 | 358.2 | 2.935 | U | |
| HN200×100×5.5×8 | 200.0 | 100.0 | 8.0 | 5.5 | 20.94 | 2,667 | 18.058 | 180.6 | 205.1 | 1.337 | U | |
| HN150×75×5×7 | 150.0 | 75.0 | 7.0 | 5.0 | 14.01 | 1,785 | 6.662 | 88.8 | 101.8 | 0.495 | U |
V Verified · C Calculated · U Unverified · D Deprecated – what this means
Where to buy
Producers of Hot-rolled beams & columns (I / H / W) – local mills first. Buy direct from the mill for large tonnages, or through a steel distributor / stockist for small quantities and cut lengths.
Local producer
Standards: GB/T 11263
Profile U
Local producer
Standards: GB/T 11263
Profile U
International producer
Standards: EN 10365, BS 4-1, EN 10025
International producer
Standards: EN 10365, EN 10025
International producer
Standards: JIS G 3192, JIS G 3136
Buying checklist
- Specify the section designation, product standard and steel grade exactly (e.g. "HN800×300×14×26 – GB/T 11263:2017").
- Ask for mill test certificates (EN 10204 type 3.1 or equivalent) traceable to the heat number.
- Sections from another standard system are not automatically equivalent – have the engineer approve any substitution.
- Check availability, minimum order quantity, stock lengths, lead time and delivery terms with the mill or distributor.
All producers of this product type →
Listing is informational only – not an endorsement, offer or confirmation of availability. Company details are marked UNVERIFIED until checked.