International producer
Standards: EN 10056-1
CN · L · Hot-rolled
Equal angles
Hot-rolled equal-leg angles to GB/T 706, designated ∠ leg × thickness.
Tick sections to compare. Values in the units shown in each column header.
| Select to compare | Designation | b1mm | b2mm | tmm | Masskg/m | Amm² | Ix10⁶ mm⁴ | Zx10³ mm³ | Imin10⁶ mm⁴ | rminmm | Data |
|---|---|---|---|---|---|---|---|---|---|---|---|
| ∠200×20 | 200.0 | 200.0 | 20.0 | 60.21 | 7,670 | 28.878 | 202.0 | 11.902 | 39.4 | U | |
| ∠180×16 | 180.0 | 180.0 | 16.0 | 43.64 | 5,559 | 17.118 | 132.3 | 7.039 | 35.6 | U | |
| ∠160×16 | 160.0 | 160.0 | 16.0 | 38.61 | 4,919 | 11.835 | 103.5 | 4.888 | 31.5 | U | |
| ∠140×12 | 140.0 | 140.0 | 12.0 | 25.58 | 3,258 | 6.074 | 60.2 | 2.504 | 27.7 | U | |
| ∠125×10 | 125.0 | 125.0 | 10.0 | 19.17 | 2,442 | 3.638 | 40.2 | 1.505 | 24.8 | U | |
| ∠110×10 | 110.0 | 110.0 | 10.0 | 16.73 | 2,131 | 2.438 | 30.8 | 1.008 | 21.7 | U | |
| ∠100×10 | 100.0 | 100.0 | 10.0 | 15.16 | 1,931 | 1.808 | 25.3 | 0.750 | 19.7 | U | |
| ∠90×8 | 90.0 | 90.0 | 8.0 | 10.97 | 1,398 | 1.071 | 16.5 | 0.443 | 17.8 | U | |
| ∠80×8 | 80.0 | 80.0 | 8.0 | 9.68 | 1,233 | 0.740 | 12.9 | 0.307 | 15.8 | U | |
| ∠75×8 | 75.0 | 75.0 | 8.0 | 9.05 | 1,153 | 0.604 | 11.3 | 0.251 | 14.7 | U | |
| ∠70×7 | 70.0 | 70.0 | 7.0 | 7.42 | 945 | 0.434 | 8.7 | 0.180 | 13.8 | U | |
| ∠63×6 | 63.0 | 63.0 | 6.0 | 5.73 | 731 | 0.273 | 6.0 | 0.113 | 12.4 | U | |
| ∠50×5 | 50.0 | 50.0 | 5.0 | 3.78 | 482 | 0.113 | 3.2 | 0.047 | 9.9 | U | |
| ∠40×4 | 40.0 | 40.0 | 4.0 | 2.43 | 309 | 0.046 | 1.6 | 0.019 | 7.9 | U |
V Verified · C Calculated · U Unverified · D Deprecated – what this means
Where to buy
Producers of Angles – local mills first. Buy direct from the mill for large tonnages, or through a steel distributor / stockist for small quantities and cut lengths.
International producer
Standards: ASTM A36
International producer
Standards: AS/NZS 3679.1
International producer
Standards: IS 808, IS 2062
International producer
Standards: EN 10056-1
International producer
Standards: ASTM A36, ASTM A572
Buying checklist
- Specify the section designation, product standard and steel grade exactly (e.g. "∠200×20 – GB/T 706:2016").
- Ask for mill test certificates (EN 10204 type 3.1 or equivalent) traceable to the heat number.
- Sections from another standard system are not automatically equivalent – have the engineer approve any substitution.
- Check availability, minimum order quantity, stock lengths, lead time and delivery terms with the mill or distributor.
All producers of this product type →
Listing is informational only – not an endorsement, offer or confirmation of availability. Company details are marked UNVERIFIED until checked.