Local producer
Standards: EN 10365, BS 4-1, EN 10025
EU · IPE · Hot-rolled
IPE I-beams
European parallel-flange I-beams with tapered root, mainly used as beams.
Tick sections to compare. Values in the units shown in each column header.
| Select to compare | Designation | dmm | bfmm | tfmm | twmm | Masskg/m | Amm² | Ix10⁶ mm⁴ | Zx10³ mm³ | Sx10³ mm³ | Iy10⁶ mm⁴ | Data |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IPE 600 | 600.0 | 220.0 | 19.0 | 12.0 | 122.46 | 15,600 | 920.930 | 3,069.8 | 3,512.8 | 33.874 | U | |
| IPE 550 | 550.0 | 210.0 | 17.2 | 11.1 | 105.53 | 13,443 | 671.245 | 2,440.9 | 2,787.3 | 26.676 | U | |
| IPE 500 | 500.0 | 200.0 | 16.0 | 10.2 | 90.69 | 11,553 | 482.036 | 1,928.1 | 2,194.3 | 21.417 | U | |
| IPE 450 | 450.0 | 190.0 | 14.6 | 9.4 | 77.58 | 9,883 | 337.470 | 1,499.9 | 1,702.0 | 16.759 | U | |
| IPE 400 | 400.0 | 180.0 | 13.5 | 8.6 | 66.31 | 8,447 | 231.315 | 1,156.6 | 1,307.3 | 13.178 | U | |
| IPE 360 | 360.0 | 170.0 | 12.7 | 8.0 | 57.10 | 7,274 | 162.675 | 903.8 | 1,019.3 | 10.435 | U | |
| IPE 330 | 330.0 | 160.0 | 11.5 | 7.5 | 49.15 | 6,261 | 117.685 | 713.2 | 804.4 | 7.882 | U | |
| IPE 300 | 300.0 | 150.0 | 10.7 | 7.1 | 42.25 | 5,382 | 83.570 | 557.1 | 628.4 | 6.038 | U | |
| IPE 270 | 270.0 | 135.0 | 10.2 | 6.6 | 36.07 | 4,595 | 57.905 | 428.9 | 484.1 | 4.199 | U | |
| IPE 240 | 240.0 | 120.0 | 9.8 | 6.2 | 30.71 | 3,912 | 38.922 | 324.3 | 366.7 | 2.836 | U | |
| IPE 220 | 220.0 | 110.0 | 9.2 | 5.9 | 26.20 | 3,337 | 27.721 | 252.0 | 285.4 | 2.049 | U | |
| IPE 200 | 200.0 | 100.0 | 8.5 | 5.6 | 22.36 | 2,849 | 19.434 | 194.3 | 220.7 | 1.424 | U | |
| IPE 180 | 180.0 | 91.0 | 8.0 | 5.3 | 18.80 | 2,395 | 13.171 | 146.3 | 166.4 | 1.009 | U | |
| IPE 160 | 160.0 | 82.0 | 7.4 | 5.0 | 15.77 | 2,009 | 8.694 | 108.7 | 123.9 | 0.683 | U | |
| IPE 140 | 140.0 | 73.0 | 6.9 | 4.7 | 12.90 | 1,643 | 5.413 | 77.3 | 88.4 | 0.449 | U | |
| IPE 120 | 120.0 | 64.0 | 6.3 | 4.4 | 10.37 | 1,321 | 3.178 | 53.0 | 60.7 | 0.277 | U | |
| IPE 100 | 100.0 | 55.0 | 5.7 | 4.1 | 8.10 | 1,032 | 1.710 | 34.2 | 39.4 | 0.159 | U | |
| IPE 80 | 80.0 | 46.0 | 5.2 | 3.8 | 6.00 | 764 | 0.801 | 20.0 | 23.2 | 0.085 | U |
V Verified · C Calculated · U Unverified · D Deprecated – what this means
Where to buy
Producers of Hot-rolled beams & columns (I / H / W) – local mills first. Buy direct from the mill for large tonnages, or through a steel distributor / stockist for small quantities and cut lengths.
Local producer
Standards: EN 10365, EN 10025
Local producer
Standards: EN 10365, EN 10025, ASTM A6
International producer
Standards: JIS G 3192, JIS G 3136
International producer
Standards: GB/T 11263, EN 10365, ASTM A6
Profile U
International producer
Standards: GB/T 11263
Profile U
Buying checklist
- Specify the section designation, product standard and steel grade exactly (e.g. "IPE 600 – EN 10365:2017").
- Ask for mill test certificates (EN 10204 type 3.1 or equivalent) traceable to the heat number.
- Sections from another standard system are not automatically equivalent – have the engineer approve any substitution.
- Check availability, minimum order quantity, stock lengths, lead time and delivery terms with the mill or distributor.
All producers of this product type →
Listing is informational only – not an endorsement, offer or confirmation of availability. Company details are marked UNVERIFIED until checked.