Local producer
Standards: EN 10025, EN 10029
EU · PL · Bars & plates
Plates
Hot-rolled plates (tolerances EN 10029, grades EN 10025-2), per 1000 mm width.
Tick sections to compare. Values in the units shown in each column header.
| Select to compare | Designation | tmm | Masskg/m | Amm² | Data |
|---|---|---|---|---|---|
| PL 5 | 5.0 | 39.25 | 5,000 | U | |
| PL 6 | 6.0 | 47.10 | 6,000 | U | |
| PL 8 | 8.0 | 62.80 | 8,000 | U | |
| PL 10 | 10.0 | 78.50 | 10,000 | U | |
| PL 12 | 12.0 | 94.20 | 12,000 | U | |
| PL 15 | 15.0 | 117.75 | 15,000 | U | |
| PL 20 | 20.0 | 157.00 | 20,000 | U | |
| PL 25 | 25.0 | 196.25 | 25,000 | U | |
| PL 30 | 30.0 | 235.50 | 30,000 | U | |
| PL 40 | 40.0 | 314.00 | 40,000 | U | |
| PL 50 | 50.0 | 392.50 | 50,000 | U |
V Verified · C Calculated · U Unverified · D Deprecated – what this means
Where to buy
Producers of Plates – local mills first. Buy direct from the mill for large tonnages, or through a steel distributor / stockist for small quantities and cut lengths.
Local producer
Standards: EN 10025
International producer
Standards: JIS G 3106, JIS G 3136
International producer
Standards: GB/T 1591
Profile U
International producer
Standards: KS D 3503, EN 10025, ASTM A36
International producer
Standards: KS D 3503
Buying checklist
- Specify the section designation, product standard and steel grade exactly (e.g. "PL 5 – EN 10029:2010").
- Ask for mill test certificates (EN 10204 type 3.1 or equivalent) traceable to the heat number.
- Sections from another standard system are not automatically equivalent – have the engineer approve any substitution.
- Check availability, minimum order quantity, stock lengths, lead time and delivery terms with the mill or distributor.
All producers of this product type →
Listing is informational only – not an endorsement, offer or confirmation of availability. Company details are marked UNVERIFIED until checked.