Local producer
Standards: IS 2062
EU · RD · Bars & plates
Round bars
Hot-rolled round bars to EN 10060.
Tick sections to compare. Values in the units shown in each column header.
| Select to compare | Designation | Dmm | Masskg/m | Amm² | Ix10⁶ mm⁴ | Zx10³ mm³ | Data |
|---|---|---|---|---|---|---|---|
| RD 50 | 50.0 | 15.41 | 1,963 | 0.307 | 12.3 | U | |
| RD 40 | 40.0 | 9.86 | 1,257 | 0.126 | 6.3 | U | |
| RD 30 | 30.0 | 5.55 | 707 | 0.040 | 2.7 | U | |
| RD 25 | 25.0 | 3.85 | 491 | 0.019 | 1.5 | U | |
| RD 20 | 20.0 | 2.47 | 314 | 0.008 | 0.8 | U | |
| RD 16 | 16.0 | 1.58 | 201 | 0.003 | 0.4 | U | |
| RD 12 | 12.0 | 0.89 | 113 | 0.001 | 0.2 | U | |
| RD 10 | 10.0 | 0.62 | 79 | 0.000 | 0.1 | U |
V Verified · C Calculated · U Unverified · D Deprecated – what this means
Where to buy
Producers of Flat & round bars – local mills first. Buy direct from the mill for large tonnages, or through a steel distributor / stockist for small quantities and cut lengths.
International producer
Standards: ASTM A36
International producer
Standards: ASTM A36
International producer
Standards: AS/NZS 3679.1
International producer
Standards: IS 2062
International producer
Standards: ASTM A36
Buying checklist
- Specify the section designation, product standard and steel grade exactly (e.g. "RD 50 – EN 10060:2003").
- Ask for mill test certificates (EN 10204 type 3.1 or equivalent) traceable to the heat number.
- Sections from another standard system are not automatically equivalent – have the engineer approve any substitution.
- Check availability, minimum order quantity, stock lengths, lead time and delivery terms with the mill or distributor.
All producers of this product type →
Listing is informational only – not an endorsement, offer or confirmation of availability. Company details are marked UNVERIFIED until checked.