Dimensions
| Parameter | Symbol | Value | Unit | US customary | Data |
|---|---|---|---|---|---|
| Depth | d | 254.0 | mm | 10.000 in | U |
| Width | b | 254.0 | mm | 10.000 in | U |
| Thickness | t | 12.7 | mm | 0.500 in | U |
| Design wall thickness (0.93t) | tdes | 11.8 | mm | 0.465 in | C |
| Outer corner radius (assumed) | ro | 23.6 | mm | 0.930 in | U |
Section Properties
| Parameter | Symbol | Value | Unit | US customary | Data |
|---|---|---|---|---|---|
| General | |||||
| Mass per metreWeight based on nominal wall thickness; all other properties use tdes = 0.93t (AISC 360 B4.2) | mass | 92.96 | kg/m | 62.46 lb/ft | C |
| Gross area | A | 11,082 | mm² | 17.18 in² | C |
| About x-axis (major) | |||||
| Second moment of area Ix | Ix | 106.519 | 10⁶ mm⁴ | 255.9 in⁴ | C |
| Elastic section modulus Zx (min) | Zx | 838.7 | 10³ mm³ | 51.18 in³ | C |
| Plastic section modulus Sx | Sx | 995.1 | 10³ mm³ | 60.72 in³ | C |
| Radius of gyration rx | rx | 98.0 | mm | 3.860 in | C |
| About y-axis (minor) | |||||
| Second moment of area Iy | Iy | 106.519 | 10⁶ mm⁴ | 255.9 in⁴ | C |
| Elastic section modulus Zy (min) | Zy | 838.7 | 10³ mm³ | 51.18 in³ | C |
| Plastic section modulus Sy | Sy | 995.1 | 10³ mm³ | 60.72 in³ | C |
| Radius of gyration ry | ry | 98.0 | mm | 3.860 in | C |
| Torsion & warping | |||||
| Torsion constant JThin-walled closed-section approximation | J | 172.150 | 10⁶ mm⁴ | 413.6 in⁴ | C |
| Surface area | |||||
| External surface area | extArea | 0.975 | m²/m | 3.200 ft²/ft | C |
| Internal surface area | intArea | 0.901 | m²/m | 2.957 ft²/ft | C |
Nominal designation mass 92.95 kg/m; calculated 92.96 kg/m (+0.0%).
Steel Grades
| Grade | Standard | fy MPa | fu MPa | Note | Data |
|---|---|---|---|---|---|
| A500 Grade C (square/rect.) | ASTM A500/A500M | 345 | 425 | Common grade for square/rectangular HSS | U |
Strengths shown for governing thickness t = 12.7 mm. Density 7850 kg/m³, E = 200 000 MPa.
Where to buy
Producers of Hollow sections & pipes – local mills first. Buy direct from the mill for large tonnages, or through a steel distributor / stockist for small quantities and cut lengths.
Local producer
Standards: ASTM A500, ASTM A1085
International producer
Standards: JIS G 3444
International producer
Standards: EN 10210, EN 10219
International producer
Standards: JIS G 3444, JIS G 3466
International producer
Standards: GB/T 8162, GB/T 8163
International producer
Standards: AS/NZS 1163
Buying checklist
- Specify the section designation, product standard and steel grade exactly (e.g. "HSS10x10x1/2 – ASTM A500/A500M – A500 Grade C (square/rect.)").
- Ask for mill test certificates (EN 10204 type 3.1 or equivalent) traceable to the heat number.
- Sections from another standard system are not automatically equivalent – have the engineer approve any substitution.
- Check availability, minimum order quantity, stock lengths, lead time and delivery terms with the mill or distributor.
All producers of this product type →
Listing is informational only – not an endorsement, offer or confirmation of availability. Company details are marked UNVERIFIED until checked.
Source & Verification
- Source publisher
- Pending verification – nominal dimensions entered by the application developer
- Source document
- ASTM A500/A500M and AISC Shapes Database (square HSS)
- Edition
- —
- Publication year
- —
- Page reference
- —
- Last updated
- 2026-10-12
- Verification status
- Unverified
Outer corner radius 2.0 × design wall thickness (AISC convention) for property calculation; confirm against ASTM A500/A500M and AISC Shapes Database (square HSS) and the manufacturer catalogue. Typical grade: A500 Gr C.