PL5 (per 1000 mm width)
Plate 5 mm (per 1000 mm width)
Mass39.25kg/m
A5,000mm²
Dimensions
| Parameter | Symbol | Value | Unit | Data |
|---|---|---|---|---|
| Thickness | t | 5.0 | mm | U |
| Plate width (reference strip) | width | 1,000.0 | mm | C |
Section Properties
| Parameter | Symbol | Value | Unit | Data |
|---|---|---|---|---|
| General | ||||
| Mass per metreEquals kg/m² of plate for a 1000 mm strip | mass | 39.25 | kg/m | C |
| Gross area | A | 5,000 | mm² | C |
| Surface area | ||||
| External surface areaTwo faces of a 1000 mm strip per metre run (edges excluded) | extArea | 2.000 | m²/m | C |
Steel Grades
| Grade | Standard | fy MPa | fu MPa | Note | Data |
|---|---|---|---|---|---|
| 250 | AS/NZS 3678:2016 | 280 | 410 | Confirm availability with supplier | U |
| 300 | AS/NZS 3678:2016 | 320 | 430 | Confirm availability with supplier | U |
| 350 | AS/NZS 3678:2016 | 360 | 450 | Confirm availability with supplier | U |
Strengths shown for governing thickness t = 5.0 mm. Density 7850 kg/m³, E = 200 000 MPa.
Source & Verification
- Source publisher
- Pending verification – nominal dimensions entered by the application developer
- Source document
- AS/NZS 3678:2016 Structural steel – Hot-rolled plates, floorplates and slabs
- Edition
- 2016
- Publication year
- 2016
- Page reference
- —
- Last updated
- 2026-10-12
- Verification status
- Unverified
Reference strip 1000 mm wide: mass per metre equals mass per square metre of plate. Thickness tolerance per AS/NZS 3678 not included.